The rear spar and main skin are drilled and clecoed together.
posted by Unknown at 11:56 PM
Monday, March 03, 2008
Previous Posts
- Stopping for a photo shoot.
- Followed by the centre main skin...
- Here , I drilled the outer main skin to the main rib.
- Drilling the centre leading edge was a bit trickie...
- Thumbs up for a job well done after lots of drilling.
- Wala
- 20 Feb 08 : Continued from where i left off end of...
- 09 November 2007. Have achieved a lot today with e...
- Cleco together short of riveting coz manual indica...
- Same procedure for the other set of assembly.
0 Comments:
Post a Comment
<< Home