Here
, I drilled the outer main skin to the main rib.
, I drilled the outer main skin to the main rib.
posted by Unknown at 11:54 PM
Monday, March 03, 2008
Previous Posts
- Drilling the centre leading edge was a bit trickie...
- Thumbs up for a job well done after lots of drilling.
- Wala
- 20 Feb 08 : Continued from where i left off end of...
- 09 November 2007. Have achieved a lot today with e...
- Cleco together short of riveting coz manual indica...
- Same procedure for the other set of assembly.
- Patience does it..
- after drilling..close up view with clecoes in place.
- Next..the spacer is clecoed onto the assembly for ...
0 Comments:
Post a Comment
<< Home