21 feb 08: The nose leading edge is drilled at the upper centre part (note: i did not follow the sequence in the manual somehow).
posted by Unknown at 11:59 PM
Monday, March 03, 2008
Previous Posts
- Finally, the trailing edge is drilled.
- The rear spar and main skin are drilled and clec...
- Stopping for a photo shoot.
- Followed by the centre main skin...
- Here , I drilled the outer main skin to the main rib.
- Drilling the centre leading edge was a bit trickie...
- Thumbs up for a job well done after lots of drilling.
- Wala
- 20 Feb 08 : Continued from where i left off end of...
0 Comments:
Post a Comment
<< Home