After a tedious job, i managed to finished 
drilling the upper inboard skin stiffeners.
drilling the upper inboard skin stiffeners.
posted by Unknown at 12:00 AM
Sunday, July 27, 2008
Previous Posts
- History repeats for the upper skin stiffeners..
- I have removed the lower skin clecoes, flipped ove...
- Here, i drilled the front spar holes with #30 dril...
- Work accomplished.
- Drilling in progress...
- This photo shows the left inboard wing skin with t...
- These are the two lower stiffeners on the left low...
- Close up view of the drilled lower skin stiffeners.
- With no helper, i need to consciously hold the woo...
0 Comments:
Post a Comment
<< Home