posted by Unknown at 11:59 PM
Saturday, July 26, 2008
Previous Posts
- I have removed the lower skin clecoes, flipped ove...
- Here, i drilled the front spar holes with #30 dril...
- Work accomplished.
- Drilling in progress...
- This photo shows the left inboard wing skin with t...
- These are the two lower stiffeners on the left low...
- Close up view of the drilled lower skin stiffeners.
- With no helper, i need to consciously hold the woo...
- The wood you see here was used to provide a solid ...
- With two side grips, the skin stiffener was aligne...
0 Comments:
Post a Comment
<< Home