Five rivet holes drilled with #30 bit as instructed by the manual at a station on the left wing front spar.
posted by Unknown at 2:22 AM
Monday, September 10, 2007
Previous Posts
- All the leading edge and main ribs between statio...
- Tadah!!
- Drilling the rivet holes of the aileron cove rib 1...
- Result of an hour plus of cutting and breaking a ...
- Shim in place ready for drilling.
- Outline of shim required for the left wing centre ...
- Back to the main root rib..Here, i have drilled th...
- What a handful!!
- Next, drilling of the four holes using #40 bit on ...
0 Comments:
Post a Comment
<< Home