Drilling the rivet holes of the aileron cove rib 1 through the aft spar while being clamped against flap cove rib 14.
posted by Unknown at 2:16 AM
Monday, September 10, 2007
Previous Posts
- Result of an hour plus of cutting and breaking a ...
- Shim in place ready for drilling.
- Outline of shim required for the left wing centre ...
- Back to the main root rib..Here, i have drilled th...
- What a handful!!
- Next, drilling of the four holes using #40 bit on ...
- Two pairs of upper and lower aileron bellcrank br...
- Drilling in process using my dremel tool.
- Nine #30 bit holes were drilled .
0 Comments:
Post a Comment
<< Home