With the bottom front and aft spar drilled, the main ribs in between are drilled as well. 
posted by Unknown at 10:13 PM
Friday, February 20, 2009
Previous Posts
- Back on drilling the bottm front spar of starboar...
- With flap track in place
- Preparing the flap track
- 22 Oct 08 :Installing pulleys onto the wing
- Pulley bracket
- A close up view of the inner side looking out on t...
- The outboard aileron hinge is also drilled appropr...
- Close up view of the aileron bellcrank assembly . ...
- The inboard hinge with #40 rivet holes drilled and...
- I am seen using a 90 degrees drilling tool as well.
0 Comments:
Post a Comment
<< Home