Here , the inner and center skins are mated together before riveted to the lower spar and cove ribs.
posted by Unknown at 3:10 PM
Wednesday, April 30, 2008
Previous Posts
- Proof of me doing the drilling. Thanx to Dev for t...
- Back to my project, the lower inner skin is positi...
- Exterior of VH-TCU , a Cirrus SR20 which is made o...
- Just a side track from my project..an introduction...
- The two fuselage halves which my dad and i tried ...
- Here , the cockpit cage is now securely housed in...
- 20 April 2008 : After my Abu Dhabi flight , i drov...
- Then, the skins are drilled onto the lower rear sp...
- Well done!
0 Comments:
Post a Comment
<< Home