Tadah!!!
posted by Unknown at 8:17 AM
Friday, November 09, 2007
Previous Posts
- Proof of me doing the riveting...
- Riveting the aileron bellcrank assembly.
- After finishing riveting the brackets..Note: I hav...
- Back here at my dad's factory in KL in anticipat...
- After back from corrosion proofing plus cutting at...
- Before corrosion proofing..
- Drawing out the inboard pulley brackets on the sto...
- Drawing out the flap track reinforcement angle on ...
0 Comments:
Post a Comment
<< Home