Cutting brackets in progress using my reliable Dremel kit.
posted by Unknown at 7:41 AM
Friday, November 09, 2007
Previous Posts
- 02 Oct 2007.Fabricating aileron outboard pulley br...
- Stopping by for another photo shot. Looking back a...
- Another repeat for the upper inboard skin.
- Repeat this process for the upper center skin. Not...
- Seen here in this photo, i drilled and clecoed the...
- Btw, i did not follow the manual w/reg clecoing ...
- The outboard upper main skin was placed in positio...
- On a hindsight w/ regd to the spar cap mistake, th...
- Looking back on this photo, i now realised my mist...
- Cutting and especially filing the spar cap for the...
0 Comments:
Post a Comment
<< Home